Conversor industrial 100/1000 SFP a 10/100/1000T Poe 802.3bt

Physical Port

    One 10/100/1000BASE-T with IEEE 802.3bt++ Gigabit RJ45 port

    1 SFP port, supporting 100/100BASE-X transceiver dual mode

Power over Ethernet

    Complies with IEEE 802.3bt PoE++ Type-4  PSE

    Compatible with IEEE 802.3at/af PoE+ standard

    1 IEEE 802.3 bt/at/af device powered

    Supports PoE Power up to 95 watts for PoE port

    Provides DC 54V power over RJ45 Ethernet cable to PD with Ethernet port

    Auto detects IEEE 802.3bt/at/af equipment and protects devices from being damaged by incorrect installation

    Remote power feeding up to 100m

    Auto detects powered device (PD)

Layer 2 Features

    Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode on RJ45 port

    Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

Hardware

    LED Indicators

        System: Power 1, Power 2, Alarm and PoE usage 

        Fiber port: LNK/ACT

        10/100/1000BASE-T port: LNK/ACT, PoE-in-use

    DIP switch 1: LFPP (Link Fault Passthrough PoE Control) On/Off

    DIP switch 2: PoE (Legacy / BT) mode selection

Industrial Case and Installation

    IP30 metal case 

    DIN-rail, wall-mount or side wall-mount design for redundant power design

    12 ~ 54V DC redundant power with reverse polarity protection and connective removable terminal block for master and slave power

    Supports 6000 VDC Ethernet ESD protection

    -40 to 75 degrees C operating temperature

Dimensions (W x D x H) 32 x 87 x 135 mm

Weight 447g

Power Requirements 12-54V DC,

Redundant power with reverse polarity protection

Power Consumption System ON without loading

 2V DC: 3.6W

 54V DC: 4.4W

Full loading with PoE

 12V DC: 70W

 54V DC: 101.3W

Flow Control Back pressure for half duplex mode

IEEE 802.3x pause frame for full duplex mode

Switch Fabric 2Gbps

Throughput 2.98Mbps@64bytes

Address Table 2k entries

Shared Data Buffer 1M bits

Maximum Frame Size 9K

ESD Protection 6KV DC

Enclosure IP30 metal case

Installation DIN-rail kit and wall-mount ear

Power Over Ethernet

PoE Standard IEEE 802.3bt Power over Ethernet Plus Plus

PoE Power Output 802.3bt PoE++: 95W

Legacy mode: 95W

PoE Power Supply Type End-span + Mid-span

Power Pin Assignment End-span: 1/2 (-), 3/6 (+);

Mid-span: 4/5 (+), 7/8 (-)

PoE Power Budget 95 watts@24-54V DC input

60 watts@12-23V DC input

Standards Conformance

Regulatory Compliance FCC Part 15 Class A, CE

Protocols and Standards Compliance IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3z Gigabit Ethernet over Fiber Optic

IEEE 802.3x Flow Control

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3bt Power over Ethernet Plus Plus

IEEE 802.3az Energy Efficient Ethernet (EEE)

Stability Testing IEC60068-2-32 (free fall)

IEC60068-2-27 (shock)

IEC60068-2-6 (vibration)